Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!
IC697PWR711 is a power supply module manufactured by GE Fanuc, belonging to the GE Fanuc 90-30 series of Programmable Logic Controllers (PLC). Here are its detailed specifications:
- Input Voltage: Can be powered by 120VAC, 240VAC, or 125VDC, with an operating range of 90VAC to 264VAC and 100VDC to 150VDC.
- Output Voltage: Provides three output voltages: +5VDC, +12VDC, and -12VDC, with a total power of 100 watts. Among them, the +5VDC output can reach a maximum of 20 amperes, the +12VDC output a maximum of 2 amperes, and the -12VDC output a maximum of 1 ampere.
- Power: The rated input power is 135 watts (for typical operation), with a maximum of 160 watts.
- Installation Method: Adopts a slide-in rack mounting structure, which can be directly inserted into the 48-pin backplane mounting connector in the leftmost slot of the rack. It is compatible with any standard IC697 or VME integrator rack.
- Dimensions: Approximately 6.3cm × 29.2cm × 22.2cm.
- Overvoltage Protection: An electronic shutdown circuit prevents the +5V voltage from exceeding 6.2 volts, and a backup voltage clamp prevents sustained overvoltage. The +5VDC output overvoltage is limited to 5.7V to 6.7V.
- Overcurrent Protection: All three output terminals are equipped with electronic current limiting, and normal operation will resume after the overload is eliminated.
- Short-Circuit Protection: Features an electronic short-circuit protection function to ensure safety.
- Supports single-power dual-rack operation, and interconnection with the second rack is achieved through pre-wired cables.
- Incorporates power factor correction when operating on AC.
- The operating temperature range is 0°C to 60°C. When operating continuously (for more than one hour) under low line voltage and high-temperature conditions, power derating is required.
Related products：
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Reviews
There are no reviews yet.