Full Product Name: ABB High-voltage Asymmetrical IGCT Power Module (Integrated Gate-Commutated Thyristor)

5SHY5055L0002: Device model number (core semiconductor identifier)

3BHE019719R0101: Order material code (unique number for procurement & maintenance)

GVC736BE101: Functional module code (drive + protection + interface assembly)

Product Status: Discontinued, only supplied as spare parts and for maintenance

Rated Blocking Voltage: 5.5kV (VDRM=5500V)

Chip Specification: 91mm asymmetrical IGCT

Maximum Turn-off Current: 4000–5000A (matched with gate unit)

On-state Voltage Drop: 2.5V; Reverse Voltage Drop: 4.5V

Gate Drive Power Supply: 28–30VDC

Switching Frequency: Max. 1kHz

Junction Temperature Range: -40℃ ~ +125℃

Storage Temperature: -40℃ ~ +70℃

Weight: Approx. 8.5kg

Mounting Structure: Press-pack type, compatible with high-voltage water-cooled / air-cooled heat sinks

IGCT Chip: Core high-voltage high-current switch with low loss and high reliability

Integrated Gate Unit (IGU): On-board drive with low-inductance design and precise switching control

Protection Circuit: Full protection against overcurrent, overvoltage, overheating and gate short circuit

Power Terminals: High-current bolt terminals, suitable for high-voltage busbars

Control Interface: Signal, feedback and fault diagnosis ports

Heat Sink Base: Press-fit metal substrate, compatible with forced water cooling and high-performance air cooling

Low Conduction Loss: Higher megawatt-level conversion efficiency than conventional IGBT

Integrated Drive: No external drive board required, simplifying the system and improving anti-interference capability

Press-pack Package: High thermal conductivity and mechanical strength, suitable for series / parallel expansion

Full Protection: Built-in fault detection and locking function to ensure system safety

High Reliability: Adapted to continuous industrial operation, long service life and maintenance-free

ABB ACS6000 / ACS5000 series medium and high-voltage inverters

Metallurgical rolling mills, mine hoists, large fan and pump transmission systems

Wind power / PV grid-tied inverters and energy storage converters

Railway traction converters and marine electric propulsion systems

Flexible AC Transmission Systems (FACTS), Static Var Compensator (SVC / STATCOM)

High Voltage Direct Current (HVDC), high-power industrial rectification and inversion equipment

Applicable to ABB high-voltage power units and IGCT valve banks

Preferred Replacement: 5.5kV 91mm IGCT of the same 5SHY series

Maintenance Replacement: Gate drive, cooling mode and electrical interface shall be fully matched

Installation: Comply strictly with press-fit torque requirements to ensure stable electrical and thermal contact

Cooling: Water cooling is preferred; air cooling requires high airflow and low wind resistance design

Wiring: Fasten power terminals with specified high torque; shield and ground all control cables

Inspection: Verify gate power supply, insulation resistance and fault circuit before power-on

Environment: IP40 protection grade, dust-proof, moisture-proof and anti-corrosion