IS215VCMIH2BB VME communication interface card
Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!
IS215VCMIH2BB is a VME communication interface card in General Electric (GE)’s Mark VI series, serving as a communication interface between the controller and I/O boards in gas turbine control systems, as well as with the IONet system control network. . Below is an introduction to some features of this module:
- Multi-Channel Input: Typically equipped with multiple digital input channels, enabling simultaneous monitoring of multiple signal sources.
- High Reliability: Designed with high reliability to operate stably in harsh industrial environments.
- Diverse Input Types: Supports various types of digital input signals, such as status signals from switches, sensors, or other digital devices.
- Voltage/Current Input: Compatible with different ranges of voltage or current inputs to meet diverse application requirements.
- Channel Isolation: Features channel isolation to separate input signals, preventing electrical interference and protecting other system components.
- Real-Time Monitoring: Supports real-time monitoring of input signal status to detect and respond to system events and abnormalities.
- Board Type: 6U high VME board, with a width of 0.787 inches.
- Processor: Adopts Texas Instruments’ TMS320C32 32-bit digital signal processor.
- Memory:
- 32KB dual-port memory, configured with 32-bit transmission.
- 256k x 32 SRAM.
- 512k x 8 (VCMIH B) or 4096K x 8 (VCMIH C) flash memory.
- Communication Interfaces:
- 3 IONet 10Base2 Ethernet ports with BNC connectors, transmission rate of 10Mbit/s.
- 1 RS-232C serial port with a D-type plug connector, baud rate limited to 9600.
Monitors and alarms internal power buses of +5V, 12V, 15V, and 28V. Alarm settings are typically 3.5% for all except the 28V power supply, which is set to 5.5% (customizable).
- Belongs to the UCSB controller module, with a built-in power supply and no need for jumper settings.
- No battery or fan, with a smaller panel size and easily updatable flash memory.
- Microprocessor: 600MHz Intel EP80579.
- Memory: 256MB DDR2 SDRAM (with Error-Correcting Code, ECC).
- NAND flash size: 2GB.
- Operating system: QNX Neutrino.
- Weight: Approximately 2.4 pounds.
Related products：
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Reviews
There are no reviews yet.