IC697PWR748 Rack mounted power module

IC697PWR748 Rack mounted power module

---

 

Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!  

 

 

 

IC697PWR748 is a rack mounted power module designed by GE Fanuc Automation for the 90-70 series. The following is its detailed information:
Basic parameters
Rated power: 90 watts.
Input voltage: The nominal line voltage is 48 volts DC, with a voltage range of 35 to 60 volts DC.
Output parameters: There are 3 outputs, namely 5V DC and 18A, 12VDC and 1.5A, and 12VDC and 1A.

 

 

Functional Features
Installation method: Adopting a sliding rack installation structure, it can be directly inserted into the 48 pin backplane connector on the left side of the rack.
Dual rack power supply: It can supply power to two racks simultaneously, but the second rack only requires a 5V power supply and consumes less than 5.2 amperes of current. Two racks are connected through pre wired cable IC697CBL700.

 

 

Protection function: Provide electronic overcurrent limitation for each output, and when the maximum rated current is exceeded, the output voltage will drop to protect the equipment. In addition, it also has overvoltage protection function, which outputs clamp when the 5V bus exceeds 6.7V. The power output can withstand a complete loss of input power for 10 milliseconds at full load.

 

 

Related products： 

---

 

 

 

[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.