IS200TPROH1BBB Multi functional digital signal controller (DCS) module
Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!
The IS200TPROH1BBB is a multifunctional digital signal controller (DCS) module under GE’s Speedtronic™ Mark VI series. It is mainly used in industrial automation, particularly playing a key role in turbine control systems. It can communicate with various field devices and process data, ensuring the reliability of data exchange and control operations.
- Input Voltage: 12-24V DC
- Operating Temperature Range: -20°C to 70°C
- Storage Temperature Range: -40°C to 85°C
- Power Consumption: 10W
- Dimensions: 100mm × 50mm × 30mm
- Weight: Approximately 0.5kg
- Protection Rating: IP65
- Communication Protocol: Supports Modbus RTU
- Supported Signals: Resistive strain gauge load cells, 4-20mA current signals, 0-10V voltage signals, and other input/output signals.
As a protective terminal board, it can shield electronic equipment from electromagnetic interference, offering high reliability and stability. It is made of advanced technologies and high-quality materials, with its design considering user-friendliness and equipment safety, making it easy to install and operate.
In terms of appearance, the circuit board is rectangular. There are 2 black terminal blocks on the left edge, containing 48 silver metal terminals. A pair of red relays is located at the top; to the left of the relays are metal oxide varistors. Near the upper right corner, there are 3 black variable resistors. Small yellow capacitors are at the bottom, where many black rectangular diodes are also concentrated.
Widely used in industries such as electric power, energy, and manufacturing, it can be applied in scenarios like turbine control systems, industrial automation production lines, power plant turbine control, and chemical production process monitoring.
For offline replacement:
- First, deactivate the exciter and ensure the power indicator is not lit.
- Loosen the screws, lift the ejector tabs, and remove the old module.
- Insert the new module and tighten the screws.
- Finally, connect the power supply and check if the indicator light is on.
For online replacement (redundant systems):
- First, identify the faulty module and verify that control has been transferred to another master station.
- Power off the part where the faulty module is located.
- Follow the steps above to remove and replace the module.
- Reconnect the power supply and check the indicator light.
Related products：
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Reviews
There are no reviews yet.